Using RemoteUI
Using RemoteUI .............................................................................................................................................. 765
Using RemoteUI
RemoteUI is software with which you can access the printer via the network from your Web browser to confirm the printer
status, operate jobs, and configure the settings. Since the software (Web server) for using RemoteUI is built in the printer,
preparing software other than a Web browser is unnecessary. You can use RemoteUI if an imagePROGRAF printer on a
network is connected to your computer. If you start your Web browser and specify the IP address of the printer, the Remo-
teUI screen is displayed, and you can use RemoteUI.
Important
• To use RemoteUI, an IP address must be set on the printer in advance. For the method of setting an IP ad-
dress, see "Configuring the IP Address on the Printer." →P.768
What You Can Do With RemoteUI
With RemoteUI, you can access the printer via a network, configure network settings, and display the current status of the
printer, various types of information, the processing status of jobs, etc.
Starting RemoteUI
Start RemoteUI by the following operations.
1. Start your Web browser.
2. Enter the following URL in Address or Location.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
Network Setting
>
Using RemoteUI
>
iPF655
Using RemoteUI
10
765
To Next Page
Loading...
Need help?
General