Printing performance
Print method Bubblejet
Maximum resolution 2400 dpi horizontally (*1 →P.906 ) × 1200 dpi vertically
Printhead PF-04
Number of nozzles MBK: 5120; Others: 2560 each color
*1: Prints with a minimum 1/2400 inch dot pitch between ink droplets.
Interface
USB Format Internal port
Mode Full-speed (12 Mbps), high-speed (480 Mbps), bulk transfer
Connector Series B (4-pin)
Ethernet Format Internal port
Specification IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX/Auto-Negotiation,
IEEE 802.3ab1000Base-T/Auto-Negotiation, IEEE 802.3x Full Duplex
Protocols IPX/SPX (Netware 4.2, 5.1, 6.0), SNMP (Canon-MIB compatible),
TCP/IP(IPv4/IPv6), AppleTalk, HTTP
Ink
Ink Tank
MBK Ink Tank ( Matte Black Ink,
or black ink for matte paper)
Pigment ink PFI-102MBK
BK Ink Tank ( Black Ink) Dye ink PFI-102BK
C Ink Tank ( Cyan Ink) Dye ink PFI-102C
M Ink Tank ( Magenta Ink) Dye ink PFI-104M
Y Ink Tank ( Yellow Ink) Dye ink PFI-102Y
Capacity 130 ml (4.4 fl oz) per color
(*1 →P.906 )
*1: The provided Starter Ink Tanks contain 90 ml (3.0 fl oz) each.
Paper
For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See Paper Reference
Guide.)
Paper width
Rolls 254.0–609.6 mm (10–24 in)
Sheets 203.2–609.6 mm (8–24 in)
Length of one
page(*2 →P.907 )
Rolls 203.2(*1 →P.907 )-18,000 mm (8–708.7 in)
Sheets 279.4–1,600 mm (11–63 in)
Thickness Rolls 0.07–0.8 mm (0.0028–0.031 in)
Sheets 0.07–0.8 mm (0.0028–0.031 in)
Specifications
>
Printer Specifications
>
Specifications
iPF655
14
906
To Next Page
Loading...
Need help?
General