Messages regarding ink
Ink insufficient. ................................................................................................................................................ 890
No ink left. ....................................................................................................................................................... 890
Remaining level of the ink cannot be correctly detected. .............................................................................. 890
Unable to detect ink level correctly. ............................................................................................................... 890
Close Ink Tank Cover ...................................................................................................................................... 891
Ink tank is empty. ............................................................................................................................................ 891
Not much ink is left. ......................................................................................................................................... 891
No ink tank loaded. ......................................................................................................................................... 892
Wrong ink tank. ............................................................................................................................................... 892
Do not pull out ink tank. .................................................................................................................................. 892
Ink insufficient.
Cause Corrective Action
The ink level is low, so you cannot print, clean the Print-
head, or do other operations that require ink.
Press â–² or â–¼ to select Rep. Ink Tank, and then press the
OK button. Replace the Ink Tank that is low with a new
Ink Tank.
(See "Replacing Ink Tanks.") →P.800
Press â–² or â–¼ to select Continue to print, and then press
the OK button to resume printing. However, note that this
error may affect the printing quality.
No ink left.
Cause Corrective Action
There is no ink left. Open the Ink Tank Cover and replace the Ink Tank for which the Ink Lamp is flashing.
(See "Replacing Ink Tanks.") →P.800
Remaining level of the ink cannot be correctly detected.
Cause Corrective Action
Ink level detection cannot work cor-
rectly if you use refill ink tanks.
The refill ink tank can no longer be used. See the section Ink level detection
and take the appropriate action. (See "Ink Level Detection.") →P.872
Unable to detect ink level correctly.
Cause
Corrective Action
The remaining ink level could not be correctly detected. Close the Ink Tank Cover.
The buzzer will stop once the error is cleared.
Error Message
>
Messages regarding ink
>
Ink insufficient.
iPF655
13
890
To Next Page
Loading...
Need help?
General