Other Messages
GARO Wxxxx (x represents a number) ........................................................................................................... 901
ERROR Exxx-xxxx (x represents a letter or number) ...................................................................................... 901
Hardware error. xxxxxxxx-xxxx (x represents a letter or number) .................................................................. 901
Top cover is open. .......................................................................................................................................... 902
Prepare for parts replacement. ....................................................................................................................... 902
Parts replacement time has passed. .............................................................................................................. 902
Unknown file. ................................................................................................................................................... 902
Multi-sensor error ............................................................................................................................................ 903
Error in cutter position. .................................................................................................................................... 903
GARO Wxxxx (x represents a number)
Cause Corrective Action
There is a problem with the print job. Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
ERROR Exxx-xxxx (x represents a letter or number)
Cause Corrective Action
An error requiring service may have occurred. Write down the error code and message, turn off the printer, and con-
tact your Canon dealer for assistance.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Cause Corrective Action
The last portion of roll paper was used during a print job.
The paper was not advanced because the trailing edge is ta-
ped to the roll.
Turn off the printer and remove the roll from the print-
er before restoring power.
Fastening tape or the Belt Stopper has not been removed in-
side the Top Cover.
Turn off the printer, open the Top Cover and remove
the tape or the Belt Stopper before restoring power.
Error Message
>
Other Messages
>
iPF655
GARO Wxxxx (x represents a number)
13
901
To Next Page
Loading...
Need help?
General