Other problems
The printer does not go on .............................................................................................................................. 870
The printer takes time to start up .................................................................................................................... 870
If the Printer Makes a Strange Sound ............................................................................................................. 871
Messages advising to check the maintenance cartridge are not cleared ..................................................... 871
The printer consumes a lot of ink .................................................................................................................... 871
Ink Level Detection ......................................................................................................................................... 872
The printer does not go on
Cause Corrective Action
The printer is unplugged. Plug the power cord into the outlet, and then turn on the printer.
The specified voltage is not supplied. Check the voltage of the outlet and breaker.
(See "Specifications.") →P.905
The printer takes time to start up
Cause Corrective Action
The printer may have shut down incorrectly last time. This
may happen after power outages or if the printer is unplugged
before it is turned off.
In this case, the next time power is restored, the printer's hard
disk is checked, and startup may take some time.
Please wait a while, because it may take several mi-
nutes to finish checking the hard disk.
If an error message is displayed after the hard disk
check, follow the instructions indicated to resolve the
problem.
Troubleshooting
>
Other problems
>
The printer does not go on
iPF655
12
870
To Next Page
Loading...
Need help?
General