Media Source and Media Size Settings
Follow this procedure to select the media source and the media size.
1. Press the Source and Size below Media.
The Device and Document Settings sheet opens and switches to the display that presents the media source and
size settings.
2. From the Source list, select the media source.
3. From the Size list, select the media size.
Note
• When you change the Source setting, the Size setting returns automatically to its default settings.
Every time you adjust the Source setting, you should also re-adjust the Size setting.
4. Click the OK button.
Windows Software
>
HDI Driver
>
Media Source and Media Size Settings
iPF655
3
378
To Next Page
Loading...
Need help?
General