8. In the A Page Size list, click the size of the original as specified in the application. In this case, click 10"x12".
9. Select and click a roll paper in the L Paper Source list.
10. Select the B Borderless Printing check box to display the Information dialog box.
11. Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm).
12. Click OK to close the Information dialog box.
13. In C Borderless Printing Method, click D Fit Paper Size.
14. Click Match Page Size in the G Paper Size list.
15. Confirm the print settings and print as desired.
Note
• For tips on confirming print settings, see "Confirming Print Settings(Windows) →P.212 "
Enhanced Printing Options
>
Borderless Printing
>
iPF655
Borderless Printing by Resizing Originals to Match the Paper Size (Windows)
2
107
To Next Page
Loading...
