10. Select and click a roll paper in the A Paper Source list.
11. Make sure the width of the loaded roll is displayed in the B Roll Width list—in this case, 10 in. (254.0mm).
Note
• If the width of the roll loaded in the printer is not shown in B Roll Width, click L Printer Infor-
mation on the Main pane to update the printer information.
12. Make sure the C Page Size setting matches the original size as selected in C Paper Size in the Page Attributes
dialog box—in this case, ISO A4.
13. Select the D Enlarged/Reduced Printing check box.
Enhanced Printing Options
>
Borderless Printing
>
Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X)
iPF655
2
118
To Next Page
Loading...
Need help?
General