10. To enable automatic cutting, click Printer Default in the H Automatic Cutting list. If you prefer to cut the paper
later yourself, click Print Cut Guideline.
Important
• If the automatic cut function has been deactivated on the printer, change the auto cut setting on the
printer Control Panel.
11. Click OK to close the Paper Detailed Settings dialog box.
12.
Confirm the print settings, and then click M Print to start printing.
Note
• For tips on confirming print settings, see "Confirming Print Settings(Mac OS X) →P.438 "
Enhanced Printing Options
>
Other useful settings
>
iPF655
Cutting Roll Paper After Printing (Mac OS X)
2
205
To Next Page
Loading...
Need help?
General