13. The Add Plotter - Plotter Name screen opens. Click the Next button.
Note
• You can change the Plotter Name setting here, but you will normally leave it as it is and go to Step
14.
14. The Add Plotter - Finish screen opens. Click the Finish button.
This completes the installation of the HDI driver.
15. Clicking the Finish button closes the Installation List and Setup Menu and ejects the User Software CD-ROM
from the CD-ROM drive.
Windows Software
>
HDI Driver
>
Installing with the Canon Installer
iPF655
3
368
To Next Page
Loading...
