3. Press â–² or â–¼ to select Paper Details, and then press the OK button.
4. Press â–² or â–¼ to select the type of paper, and then press the OK button.
5. Press â–² or â–¼ to select Cutting Mode, and then press the OK button.
6. Press â–² or â–¼ to select Eject, and then press the OK button.
7. Starts printing.
When printing is finished, the printer will stop without cutting.
8. Holding the printed document to prevent it from dropping, press the Cut button to cut the roll.
Manual (when using media that cannot be cut with the Cutter Unit)
1. On the Tab Selection screen of the Control Panel, press â—€ or â–¶ to select the Paper tab ( ).
Handling Paper
>
Handling rolls
>
Specifying the Cutting Method for Rolls
iPF655
6
654
To Next Page
Loading...
Need help?
General