Note regarding the Extended position
The Output Stacker has a regular position and a position for easy removal of printed documents. Use the best position for
the paper size and orientation that you are using.
For information on the types and sizes of paper that the Extended position supports, refer to the following.
• Printer Stand ST-27 : Output stacker operation guide (Included with the Printer Stand ST-27)
• Printer Stand ST-26 : Paper Reference Guide (See "Types of Paper.")
→P.626
Regular position
Extended position A Extended position B (ST-27 only)
•
Switching to Extended position A
Switch the stacker to Extended position A as follows.
Handling Paper
>
Output Stacker
>
Using the Output Stacker
iPF655
6
670
To Next Page
Loading...
Need help?
General