Note
• RemoteUI also offers many other features. You can display the ink levels, check error messages and other
status information, and cancel print jobs.
• By factory default, the English screen is displayed. To change the display language, select the desired lan-
guage under Language before logging on in administrator mode.
• If you login in Administrator Mode, you can configure to use the Jumbo Frame function in the Network
page. However, this function might not be able to be used depending on the network environment.
Network Setting
>
Using RemoteUI
>
iPF655
Using RemoteUI
10
767
To Next Page
Loading...
Need help?
General