Canon imagePROGRAF iPF655 User Manual

5. Select the IPv4 tab. In IP Address, enter the IP address assigned to the printer, and then enter the subnet mask in
Subnet Mask and the default gateway in Gateway Address.
Important
• You must specify the IP address here to be able to configure NetWare protocol settings using Remo-
teUI.
6. Click Set.
7. Click OK after the Confirmation message is displayed.
8. Exit imagePROGRAF Device Setup Utility.
Network Setting > NetWare Settings >
Specifying the Printer's Frame Type
iPF655
10
780

Canon imagePROGRAF iPF655 Specifications

General

Brand	Canon
Model	imagePROGRAF iPF655
Category	Printer
Language	English