3- 37
Printing from Windows
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
z If you do not see the checkbox for Enlarged/Reduced
Printing, then cancel the Borderless Printing
selection. The Enlarged/Reduced Printing checkbox
will appear.
z Under Enlarged/Reduced Printing select Fit Roll
Paper Width to open the dialog box below. Select the
width of the roll loaded in the printer, and then click
OK.
16
Confirm the content of the settings Preview,
then click the OK button.
Note
z To achieve the best print results, you should confirm
the appearance of the original in the Print Preview
before printing. For more details about how to display
the print preview, please refer to “Confirming the Print
Image (Print Preview)” in “Before You Begin”.
(→ P. 3- 5)
17
Click the Print button in the Print dialog box.
The print job starts.
Note
z If the print job does not execute properly on you
operating system (Windows Server 2003, Windows
XP, Windows 2000, Windows Me, Windows 98), click
Special Settings on the Layout sheet to open the
Special Settings dialog box. You may be able to
enable printing by clicking the Fine Zoom list and then
selecting On.
z If you cannot perform the print job with Windows NT
4.0, you may be able to enable printing by selecting
Standard or Draft under Print Quality on the Main
sheet.
To Next Page
Loading...
Need help?
General