Canon imagePROGRAF W6400 User Manual

4- 36
 Checking the Condition of the Printer
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
Checking the Condition of the Printer
When you see that the printouts are faded and uneven, or
streaked with white lines, print a nozzle check pattern to
determine whether the nozzles are blocked. Before you
print a nozzle check pattern, make sure roller paper or cut
sheets A3 (L) size or wider are loaded in the printer.
Note
z If you are using cut sheets, make sure at least one
sheet of unused A3 paper (not the blank sides of used
paper) or larger are set.
1 If the printer power is off, press the Power
button to switch the printer on.
Within a short time, Online or Offline is displayed.
2 Press the Online button to display MAIN
MENU.
3 Press [] or [] to select Test Print then
press [
].
4 Press [] or [] to select Nozzle Check,
then press OK button.
The nozzle check pattern prints. The printer returns
to the online mode and displays Online in the
display as soon as printing completes.
Data
Information Power
Offline
Menu
Message
Online
Cleaning
(3 sec.)
Stop/Eject
(1 sec.)
MAIN MENU
Tes t P ri n t ↓
Tes t P ri n t
Nozzle Check
MAIN MENU
Head Cleaning
Online
Cleaning
(3 sec.)
Stop/Eject
(1 sec.)

Canon imagePROGRAF W6400 Specifications

General

Brand	Canon
Model	imagePROGRAF W6400
Category	Printer
Language	English