6- 41
îš‹ Updating the Firmware
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
Updating the Firmware
By updating the firmware for this printer, you can add on
new functions and improvements for existing functions.
Obtaining the Firmware Update
Contact a Canon service center, or the dealer where you
purchased the printer, for details about how to obtain the
most recent version of the firmware update.
Confirming the Firmware Version
Perform the procedure below to confirm the current version
of the printer firmware before performing a firmware update.
If the version of the firmware in use is older than the
downloaded version, perform the firmware update.
Note
z If the version number of the printer is the same as or
newer than the firmware update in hand, then you do
not need to update the firmware.
1
If the printer power is off, press the Power
button to switch the printer on.
After a few seconds Online is displayed in the
operation panel and the Online lamp lights.
2
Press the Online button to display MAIN
MENU.
3
Press [] or [] to select Information then
press [
].
4
Press [] or [] to select S/C: xx.xx.xx.
MAIN MENU
Information ↓
Version
S/C: xx.xx.xx
To Next Page
Loading...
Need help?
General