Canon imagePROGRAF W6400 User Manual

4- 43
 Adjusting Amount of Media Feed
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
4 Press [] or [] to select Adjust Band,
then press [
].
5 Press [] or [] to select Standard Adj.,
then press [
].
6 Press [] or [] to select Yes, then press
OK button.
As the band adjustment pattern prints, the printer
reads the results of the print and automatically
adjusts the settings of the amount of line feed for the
media currently loaded in the printer.
After the amount of line feed has been adjusted, the
printer returns to the Online mode.
Adjusting Line Feed Manually
The line feed can be fine adjusted manually to increase or
decrease the amount of feed. Follow the procedure below
to perform this adjustment manually.
1 Press the Online button to display MAIN
MENU.
2 Press [] or [] to select Adjust Printer,
then press [
].
3 Press [] or [] to select Adjust Band,
then press [
].
4 Press [] or [] to select Fine Tuning,
then press [
].
Displays the values of the current settings.
Adjust Printer
Adjust Band ↓
Adjust Band
Standard Adj. ↓
Auto Adjustment
Yes
MAIN MENU
Adjust Printer ↓
Adjust Printer
Adjust Band ↓
Adjust Band
Fine Tuning ↓
MAIN MENU
Head Cleaning
Online
Cleaning
(3 sec.)
Stop/Eject
(1 sec.)

Canon imagePROGRAF W6400 Specifications

General

Brand	Canon
Model	imagePROGRAF W6400
Category	Printer
Language	English