3- 94
Printing from Macintosh
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
5
Confirm the content of the Preview, then
click the Print button.
The print job starts.
Note
z To achieve the best print results, you should confirm
the appearance of the original in the Print Preview
before printing. For more details about how to display
the Preview, please refer to “Confirming the Print
Image (Print Preview)” in “Before You Begin”. (→ P. 3-
64)
Vertical and Horizontal Banner Printing
(Long Prints)
Matching the Width of the Roll
Once you become familiar with fitting images to the full
width of the roll with your software application, it is very
easy to print vertical and horizontal banners.
Here we will describe as an example how to take a 250
mm x 600 mm original and enlarge to fit a 24” roll
(approximately 610 mm wide), and then print it as a ban-
ner (600 mm x 1,440 mm).
Note
z With this printer you can print a banner up to 18,000
mm maximum length (2,774 mm with OS 8/9).
To Next Page
Loading...
Need help?
General