1- 31
îš‹ Function Menus
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
îš„
Sub Menus
Menu Item Setting Values Function
Ink: Displays in the center the ink capacity in 7
steps (100%, 80%, 60%, 40%, 20%, 0%)
and no ink.
Displays in seven levels the capacity of ink
that the maintenance cartridge can still
absorb.
Width: X
Y
X: Media Width
Y: Media Type
The width of the media is shown on the top
line, and the type of media is shown on the
bottom line.
Remaining: Xm
YY Printable
X: Roll Remains
Y: Sheets printable with remaining
ink.
When the roll media supply detection is On,
this displays the length of the media that
remains on the roll. Also, while the ink
remains alert is displayed the number of
sheets that can be printed is also displayed.
Head Height X
Best Head Hght Y
X: Current printhead position (L, M, H)
Y: Best position for media (L, M, H)
When the Head Ht. Wrning is On, an alert is
issued if the current height of the printhead is
lower than the ideal height for the media.
100%
(100~90%)
80%
(90~70%)
60%
(70~50%)
40%
(50~30%)
20%
(30~6.9%)
0%
(6.9~0%)
~700ml
(7dot)
~600ml
(6dot)
~500ml
(5dot)
~400ml
(4dot)
~300ml
(3dot)
~200ml
(2dot)
200ml~0ml
(1dot)
To Next Page
Loading...
Need help?
General