3- 123
îš‹ Printing from Macintosh
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
5
Click the New button to define the user
defined name, the media size and margins
(for OS 8/9 click, define the user defined
name, media size and other settings, then
click the Add button).
Note
z When you select the desired size and name from the
Media Size list on the left, the Width (Wid. for OS 8/9)
and Length (Hght for OS 8/9) are entered
automatically.
z For OS 8/9, If Borderless Printing is selected, the
selection for Wid. changes automatically to a roll width
list that supports borderless printing. Select a Wid.
setting for the width of the desired roll, then enter a
number for the Hght that you want. (This function is
not provided for OS X.)
6
Click the Save button. (Not required for OS
8/9)
7
Click the OK button to close the dialog box.
Note
z If you are using OS 8/9 you are allowed to store up to a
maximum of 5 custom settings.
z The settings in the Custom Paper Size panel (Media
Design for OS 8/9) box remain in effect even after the
software application is closed.
z To delete a registered custom size, select the name of
the custom size to delete, then click the Delete button.
z To edit a registered custom size, select the name of
the custom size, then input the Width and Height
settings again. (this editing and correction cannot be
performed for OS 8/9)
To Next Page
Loading...
Need help?
General