Canon imagePROGRAF W6400 User Manual

4- 46
 Reducing the Amount of Cutting Dust
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
5 Press [] or [] to display
CutDustReduct. then press [
].
6 Press [] or [] to select a value for the
setting then press OK button.
To switch the cutter dust reduction function on for the
selected media type, select On or to release the
function for the media type select Off.
The selection is prefixed with an equals sign (=) to
denote that the cut waste reduction function is
selected.
Backlit Film
CutDustReduct. ↓
CutDustReduct.
On

Canon imagePROGRAF W6400 Specifications

General

Brand	Canon
Model	imagePROGRAF W6400
Category	Printer
Language	English