Canon imagePROGRAF W6400 User Manual

5- 22
 Macintosh Network Settings
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
2 Confirm that Ethernet is selected for the
AppleTalk connection.
 Start AppleTalk on Control Panel.
 Select Ethernet.
 Close AppleTalk to save the setting.
This completes the AppleTalk network settings for a
Macintosh.
Important
z Be sure to select the Printer Port if Ethernet is
connected via LocalTalk.
z For Mac OS X
Confirm the AppleTalk settings with Network of System
Preferences.
1 Open Network under System Preferences.
2 At the Show setting select Built-in Ethernet.
3 Select the AppleTalk sheet and confirm that
Make AppleTalk Active is selected.
If this item is not checked, select it and then click the
Apply Now button.
4 Close Network to save the settings.
This completes the AppleTalk network settings for a
Macintosh.

Canon imagePROGRAF W6400 Specifications

General

Brand	Canon
Model	imagePROGRAF W6400
Category	Printer
Language	English