5- 28
îš‹ Macintosh Network Settings
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
z To change Name, enter a 15-character name.
However, these symbols and characters are not
permitted: @ * : =
7
When a zone is set on the network, enter the
name of zone where the printer belongs.
If no zone is set, then leave the asterisk (*) entry as
it is.
Important
z The zone name must be the name of a zone that is
already entered. If you enter the name of a zone that is
not yet set, the recognition of the printer by the
Macintosh will be lost. For more details about zone
names, please contact your network system
administrator.
8
Click the OK button.
If you are using AppleTalk only, go to Step 13.
9
If you are using the Zeroconf function for the
printer connection, click the Edit... button to
the right of TCP/IP.
The Edit TCP/IP Protocol Setting page opens.
To Next Page
Loading...
Need help?
General