Note
•
To restore the original names, click the Restore button.
•
The characters that can be entered for Name in Printer Driver and Name on Control Panel are stated be-
low.
alphanumeric, space, "-", ".", "_", "(", ")", "+", "%", ",", "/"
•
For Name in Printer Driver up to 32 one Byte characters can be entered, and for Name on Control Panel up
to 16 one Byte characters can be entered.
5
In the Edit Media Types dialog box, click the Update
button.
6
The Confirm Update dialog box is displayed.
Configure Update Target and click the Execute button.
The printer control panel and printer driver media infor-
mation is updated.
Note
•
You should normally select Update the printer control panel and printer driver.
Important
•
When setting a data to the printer that differs from the data to be updated, the selected media information file
is updated. When you would like to remain the data that is set to the printer, click the Cancel button.
7
The message on the right is displayed.
If you want to save the current media information in a file, click
the Yes button. If you do not want to save it, click the No but-
ton.
Note
•
The media information is saved as a media information file (.amx file).
•
For the method for loading a saved media information file in another computer, see "Applying a Saved Media
Information File on Another Computer." ➔P.408
Changing Media Names
iPF670
User's Guide
Handling and Use of Paper Media Configuration Tool (Windows)
402
To Next Page
Loading...
