Canon iPF9000S - Page 48

Troubleshooting Guide
2-36
Panel display
Code
(last 4
digits)
Large LCD
Small
LCD 1
Small
LCD 2
Explanation/Detection sequence
Remedial Action
(★: Reference fault
isolation procedure
or tool)
Wrong paper type.
Stop: Stop Printing
Load/Eject:
Change
Paper
Paper
mismatch
Press↓
To Replace
(Paper
Type)
(Paper
Size)
Wrong paper type.
Replace paper
in cassette.
Loaded
Paper
Check
Type
Switch
Paper
In
Cassette
Wrong paper type.
Lift the release
lever and reload
the paper.
Stop: Stop Printing
Wrong paper type.
Lift the release
lever and reload
the paper.
Wrong paper type.
Lift the release
lever and reload
the paper.
Paper mismatch
Make sure media
type
and paper size match
for the adjustment
print.
Loaded
Paper
Check
Type
Press
↓ Key
and
Reload
Paper mismatch (type) (on adjustment)
The second and subsequent sheets of
paper have been fed as a paper type
different from the first sheet when LF
adjustment was made with cut sheet.
Equalize the
paper types for
the first and
second sheets
with each other in
adjustment
printing.
Wrong paper type.
Check paper type
setting in driver.
Online: Print
Stop: Stop Printing
Driver:
Chk Papr
Type
Setting
Chk
Paper
Type
Press
Online
Wrong paper type.
This type of media
is not compatible
with HP-GL/2.
PaprTyp
Mismatch
Prnt:Pres
sOnline
Paper mismatch (type)
At the start of printing, paper type specified in
the job and the type of paper actually loaded
do not match, and [Stop] has been selected
for [Paper Mismatch Detection].
Check the paper
that is actually
loaded on the
printer and the
driver paper type
setting.
Wrong paper feed
slot for this paper
type.
Press Load/Eject
and reload the
paper.
2E15
Wrong paper feed
slot for this paper
type.
Paper
Feed Slot
SpcfdPap
r NotFit
Press
↓ Key
and
Reload
Paper mismatch (type)
A paper type that cannot be fed from the
specified feeder slot has been specified.
Check the feeder
slot/cassette
pick-up setting.