● Enter the MAC address in the [Address to Register] text box and click [Add].
● You do not need to delimit the address with hyphens or colons.
Check for entry errors
● If MAC addresses are incorrectly entered, you may become unable to access the machine from the
Remote UI, in which case you need to set <MAC Address Filter> to <Off>. MAC Address
Filter(P. 340)
When [Reject] is selected for an outbound lter
● Outgoing multicast and broadcast packets cannot be ltered.
Deleting a MAC address from exceptions
● Select a MAC address and click [Delete].
3
Click [OK].
6
Restart the machine.
● Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
Using the operation panel
● You can also enable or disable MAC address ltering by pressing
on the operation panel. MAC
Address Filter(P. 340)
LINKS
Specifying IP Addresses for Firewall Rules(P. 219)
Security
225
To Next Page
Loading...
