»
Continue to Specifying Paper Size and Type in the Paper Drawer(P. 51)
When changing the paper size or type
● The factory default settings for paper size and type are <A4> and <Plain>, respectively. If you load a
different size or type of paper into the machine, make sure to change the settings. If you do not change
the settings, the machine cannot print properly.
Printing on the Back Side of Printed Paper (Manual 2-Sided Printing)
You can print on the back side of printed paper. Flatten any curls on the printed paper and insert it into the
multi-purpose tray ( Loading Paper in the Multi-Purpose Tray(P. 41) ), with the side to print face up
(previously printed side face down).
● Load one sheet of paper each time you print.
● You can use only the paper printed with this machine.
● You cannot print on the side that has previously been printed on.
LINKS
Paper(P. 440)
Notify to Check Paper Settings(P. 343)
Basic Operations
40
To Next Page
Loading...
