CaptiveAire HVLS - Hardware Torques

6
Figure 1 - Control Panel Layout
Hardware Torques
Table 1 - Torques
Thread Size Torque
1/8” Clamp 3 Ft-lbs (36 in-lbs) / 4 Nm
3/16” Clamp 4.5 Ft-lbs (54 in-lbs) / 6 Nm
3/8” Grade 8 Min 30 Ft-lbs / 41 Nm
M10 Class 8.8 Min 38 Ft-lbs / 52 Nm
1/2” Grade 8 Min 75 Ft-lbs / 101 Nm
M14 Class 8.8 Min 105 Ft-lbs / 142 Nm
8, 12, 16 Torque Nut 190 Ft-lbs / 257 Nm
20, 24 Torque Nut 265 Ft-lbs / 359 Nm
Cooling Fan
VFD mounted inside
panel. VFD may also be
mounted on fan.
High Voltage
Terminals
Low Voltage
Terminals
ECPM03
Protonode
(Optional)