Cardo Systems SMARTH - 4.7.3 Leaving DMC intercom Groups

SMARTH Manual
4. Before You Ride
- 30 -
To join an existing DMC group for SMARTH with Cardo headsets through the headset voice-assisted menu:
1. Confirm your SMARTH is in DMC intercom mode:
■ Normal battery state - LED flashes green slowly.
■ Low battery state - LED flashes red slowly.
■ Charging - LED flashes purple slowly.
2. Tap ~ and ~Volume Up twice.
3. When the voice-assisted menu reaches "Advanced Features", tap ~Intercom or use VOX.
4. When the voice-assisted menu reaches the required option, tap ~Intercom or use VOX.
4.7.3 Leaving DMC intercom Groups
You can leave a DMC intercom group without deleting the DMC intercom group. For example, you may leave a group
to create a new group or join another group. You can rejoin a group later, see "Joining DMC intercom Groups" on the
previous page.
To leave an existing DMC group for SMARTH with Cardo headsets through the headset buttons:
1. Confirm your SMARTH is in DMC intercom mode:
■ Normal battery state - LED flashes green slowly.
■ Low battery state - LED flashes red slowly.
■ Charging - LED flashes purple slowly.
To leave an existing DMC group for SMARTH with Cardo headsets through SmartSet:
To leave an existing DMC group for SMARTH with Cardo headsets through the headset voice-assisted menu:
1. Confirm your SMARTH is in DMC intercom mode:
■ Normal battery state - LED flashes green slowly.
■ Low battery state - LED flashes red slowly.
■ Charging - LED flashes purple slowly.
2. Tap ~ and ~Volume Up twice.
3. When the voice-assisted menu reaches "Advanced Features", tap ~Intercom or use VOX.
If your SMARTH is not in DMC intercom mode, press ~Intercom and ~Audio.
If your DMC group connection is lost, you remain part of the group. Once in range of any other group member,
you automatically reconnect.
If your DMC group splits with some group members remaining in range of each other but not in range of all group
members, you can continue speaking with the members still in range. Once in range of any other group member,
you automatically reconnect.
If you join a new DMC group, you automatically leave your existing DMC group.
If your SMARTH is not in DMC intercom mode, press ~Intercom and ~Audio.
If your SMARTH is not in DMC intercom mode, press ~Intercom and ~Audio.