5.2
Using DMC intercom
You can use DMC intercom to speak with other riders in your DMC group (for more information on creating DMC
intercom groups, see "Creating Groups for DMC Intercom" on page 28
"Creating Groups for DMC Intercom" on page 28
■
mute/unmute DMC intercom groups, see "Muting DMC intercom Groups" below.
■
leave DMC intercom groups, see "Leaving DMC intercom Groups" on page 30.
■
delete DMC intercom groups, see "Deleting DMC intercom Groups" on page 31
■
stream music in DMC intercom groups, see "Streaming Music in DMC intercom Mode" on the next page
■
switch between DMC intercom and Bluetooth intercom, see "Switching to Bluetooth Intercom" on page 31
5.2.1
Muting DMC intercom Groups
To mute the DMC group for SMARTH with Cardo headsets through the headset buttons:
1.
Confirm your SMARTH is in DMC intercom mode:
■
Normal battery state - LED flashes green slowly.
■
Low battery state - LED flashes red slowly.
■
Charging - LED flashes purple slowly.
2.
On your headset, press ~Intercom for 2 seconds.
To mute the DMC group for SMARTH with Cardo headsets through SmartSet:
1.
Make sure that your headset is paired to the mobile device on which SmartSet is installed.
2.
Open SmartSet and tap the DMC
3.
Tap MUTE GROUP.
To mute the DMC group for SMARTH with Cardo headsets through the headset voice-assisted menu:
5.2.2
Unmuting DMC intercom Groups
To unmute the DMC group for SMARTH with Cardo headsets through the headset buttons:
1.
Confirm your SMARTH is in DMC intercom mode:
■
Normal battery state - LED flashes green slowly.
■
Low battery state - LED flashes red slowly.
■
Charging - LED flashes purple slowly.
2.
On your headset, tap ~Intercom.
You must enable VOX when using DMC intercom. To enable VOX, see "Configuring Your SMARTH Basic Settings" on
To Next Page
Loading...
