5.
On the Road
5.1
Making and Receiving Phone Calls
5.1.1
Making Phone Calls
To make a phone call using SMARTH with Cardo headsets through the headset buttons:
●
with your mobile phone's voice dialing - press ~Phone .
●
dialing the default speed dial number - press ~Phone three times.
●
redialing the last number called - press ~Phone twice (not available during mobile or Bluetooth intercom calls).
To make a phone call using SMARTH with Cardo headsets through SmartSet:
●
In SmartSet, either:
■
tap Phone then tap the required speed dial (to define speed dials, see "Configuring Speed Dial Numbers" on
page 19).
or
■
tap REDIAL.
To make a phone call using SMARTH with Cardo headsets through the headset voice-assisted menu:
1.
Confirm your SMARTH is in Bluetooth intercom mode:
■
Normal battery state - LED flashes blue slowly.
■
Low battery state - LED flashes red slowly.
■
Charging - LED flashes purple slowly.
2.
Tap ~ and ~Volume Up twice.
3.
When the voice-assisted menu reaches "xxx", tap ~Intercom or use VOX.
4.
When the voice-assisted menu reaches the required option, tap ~Intercom or use VOX.
5.1.2
Answering Phone Calls
To answer a phone call using SMARTH with Cardo headsets through the headset buttons:
●
Tap ~Phone or ~.
To answer a phone call using SMARTH with Cardo headsets through SmartSet:
●
In SmartSet, tap xxx.
To answer a phone call using SMARTH with Cardo headsets through VOX:
●
Say "xxx" loudly.
You can use your mobile phone normally to make and receive phones while paired to your SMARTH.
If your SMARTH is not in Bluetooth intercom mode, press ~Intercom and ~Audio. For more information see,
"Switching to Bluetooth Intercom" on the previous page.
To Next Page
Loading...
