To switch to the other audio source:
1.
Stop A2DP playback from the current device (see " Listening to Music" on page 38).
2.
Start A2DP streaming from the other device (see " Listening to Music" on page 38).
SMARTH automatically remembers your last played device.
5.5.2
Listening to FM Radio
To turn on the FM radio, do one of the following:
●
To use the headset buttons: tap and ~Audio twice.
●
To use SmartSet: on the FM screen, tap the On/Off button.
●
To use the headset voice-assisted menu:
a.
Tap ~ and ~Volume Up twice.
b.
When the voice-assisted menu reaches "Radio On", tap ~ or use VOX.
To turn the FM radio off, do one of the following:
●
To use the headset buttons: press ~Audio for 2 seconds.
●
To use SmartSet: on the FM screen, tap the On/Off button.
●
To use the headset voice-assisted menu:
a.
Tap ~ and ~Volume Up twice.
b.
When the voice-assisted menu reaches "Radio Off", tap ~ or use VOX.
To play a different preset station:
●
To use the headset buttons, do one of the following:
■
tap ~Audio for the next preset
■
tap ~Audio twice for the previous preset
●
To use SmartSet: On the FM screen, tap the desired preset.
To seek the next available station:
●
To use SmartSet: On the FM screen, do one of the following:
■
tap .
■
tap .
●
To use the headset voice-assisted menu:
a.
Tap ~ and ~Volume Up twice.
b.
When the voice-assisted menu reaches "Next Station", tap ~ or use VOX.
To auto scan available stations and select your desired station:
●
To use the headset buttons:
You can mute the DMC intercom while listening to the FM radio by pressing ~Intercom for 2 seconds. Unmute
DMC intercom by pressing ~Intercom
When you switch on your FM radio, the station that was playing when you last switched off resumes playing.
To Next Page
Loading...
