4.
When the voice-assisted menu reaches the required option, tap ~Intercom or use VOX.
4.7.4
Deleting DMC intercom Groups
You can delete a DMC intercom group. You must join the deleted group again after deleting the group, see "Joining
DMC intercom Groups" on page 29.
To delete an existing DMC group for SMARTH with Cardo headsets through the headset buttons:
1.
Confirm your SMARTH is in DMC intercom mode:
■
Normal battery state - LED flashes green slowly.
■
Low battery state - LED flashes red slowly.
■
Charging - LED flashes purple slowly.
2.
On your headset, tap ~Intercom.
3.
Press ~Intercom for 5 seconds.
To delete an existing DMC group for SMARTH with Cardo headsets through SmartSet:
1.
Make sure that your headset is paired to the mobile device on which SmartSet is installed.
2.
Open SmartSet and tap :
3.
Tap Group. The Group Manager appears.
4.
Locate your required group and tap .
To delete an existing DMC group for SMARTH with Cardo headsets through the headset voice-assisted menu:
4.7.5
Switching to Bluetooth Intercom
Your SMARTH operates in two intercom modes:
■
Bluetooth intercom
■
DMC intercom
You use DMC intercom in DMC intercom mode and Bluetooth intercom in Bluetooth intercom mode. The LED
indicates your current intercom mode. You must be DMC intercom mode to use DMC intercom features. For other
feature, you must be in Bluetooth intercom mode.
To switch from DMC intercom to Bluetooth intercom for SMARTH with Cardo headsets through the headset
buttons:
1.
Confirm your SMARTH is in DMC intercom mode:
■
Normal battery state - LED flashes green slowly.
■
Low battery state - LED flashes red slowly.
■
Charging - LED flashes purple slowly.
2.
On your headset, press ~Intercom and ~Audio.
To switch from DMC intercom to Bluetooth intercom for SMARTH with Cardo headsets through SmartSet:
To switch from DMC intercom to Bluetooth Intercom for SMARTH with Cardo headsets through the headset voice-
assisted menu:
If your SMARTH is not in DMC intercom mode, press ~Intercom and ~Audio.