3.7
Using One+8 Intercom
You can use One+8 Intercom for conference calls with up to 8 riders. The riders are called "buddies". You preset your
buddies in your "buddy list" with any name you chose. You can connect with your buddies directly using a buddy name
on your buddy list.
If your buddy is not in intercom range, One+1 Intercom automatically makes a phone to the buddy. You use Cardo
Community to set each buddy's phone number.
3.7.1
Managing Your One+8 Intercom Buddy List
You must add riders to your One+1 buddy list before using One+8 Intercom.
To add a buddy to your One+8 buddy list:
●
To use Cardo Community:
●
To use the headset buttons:
a.
Make sure that your headset is paired to the mobile device on which SmartSet is installed.
b.
Tap ~Intercom and ~Volume Up for 5 seconds.
c.
xxx
●
To use SmartSet:
a.
Make sure that your headset is paired to the mobile device on which SmartSet is installed.
b.
Tap .
c.
Tap Bluetooth.
d.
In BUDDIES, tap . xxx
e.
SmartSet prompts you to confirm you are entering Buddy Pairing mode. Tap YES.
To change a buddy on your One+8 buddy list:
●
To use the headset buttons:
●
To use SmartSet:
a.
Make sure that your headset is paired to the mobile device on which SmartSet is installed.
b.
Tap .
c.
Tap Bluetooth.
d.
In BUDDIES, tap xxx. xxx
e.
xxx
●
To use the headset voice-assisted menu:
To remove a buddy from your One+8 buddy list:
●
To use the headset buttons:
You add yourself to the buddy list so other riders on the buddy list can call you.
If your SMARTH is not in Bluetooth intercom mode, SmartSet prompts you to change to Bluetooth intercom. Tap
OK.
To Next Page
Loading...
Need help?
General
