*
Charging - LED flashes purple slowly.
a.
Start playing music over A2DP (see " Listening to Music" on page 38) or the FM radio (see "Listening to FM
Radio" on page 40).
b.
Pair the Bluetooth intercom on Channel A or B. (If you do not pair with a channel, Channel A is automatically
paired by default.)
c.
Tap ~Volume Down.
●
To use SmartSet:
a.
Confirm your SMARTH is in Bluetooth intercom mode:
*
Normal battery state - LED flashes blue slowly.
*
Low battery state - LED flashes red slowly.
*
Charging - LED flashes purple slowly.
a.
Either:
*
on the MUSIC screen, tap MUSIC SHARING
or
*
on the FM screen, tap FM SHARING.
a. Tap ~Volume Down.
●
To use the headset voice-assisted menu:
a.
Confirm your SMARTH is in Bluetooth intercom mode:
*
Normal battery state - LED flashes blue slowly.
*
Low battery state - LED flashes red slowly.
*
Charging - LED flashes purple slowly.
a.
Tap ~ and ~Volume Up twice.
b.
When the voice-assisted menu reaches:
*
"Start Music Sharing" / "Stop Music Sharing", tap ~ or use VOX.
or
*
"Start Radio Sharing" / "Stop Radio Sharing", tap ~ or use VOX.
If your SMARTH is not in Bluetooth intercom mode, press ~Intercom and ~Audio. For more information see,
"Switching to Bluetooth Intercom" on page 31.
If your SMARTH is not in Bluetooth intercom mode, press ~Intercom and ~Audio. For more information see,
"Switching to Bluetooth Intercom" on page 31.
If your SMARTH is not in Bluetooth intercom mode, press ~Intercom and ~Audio. For more information see,
"Switching to Bluetooth Intercom" on page 31.
To Next Page
Loading...
