26
Comfort-wrap headgear
Intuitive design: The intuitive comfort wrap design allows a
single clinician to secure the generator and helps minimize
infant discomfort. Rather than pulling the device down over
the infant’s head, the clinician gently wraps the headgear
around the infant’s head and secures it with the adjustable
straps for a custom fit. Six available sizes make size
selection easy.
Adjustability: The design and placement of the fixation
straps provide comfort and flexibility by keeping the
device away from the infant’s eyes. As the infant’s head
circumference changes, the headgear can easily be
modified to adapt.
Stabilization: The comfort wrap design secures
the generator at the proper angle, which aids in
minimizing leaks.
Bonnets
Comfort soft: The soft cotton offers a little stretch
to conform to the infant’s head and provide warmth.
Open top: Open at the top, the bonnet offers access to
the scalp, allowing IV therapy, phototherapy and head
ultrasound scans. Between therapies, the bonnet ends
can be tied, covering the scalp and reducing heat loss.
Stabilization: The bonnet with the support cradle
secures the generator at the proper angle, which aids
in minimizing leaks.
Size designation: The tops of the bonnets are color-coded
for easy size identification. The bonnets are available in
10 sizes to provide a comfortable fit.
Fixation tip
Periodically, at least every four hours:
• Reassess the xation device for proper placement
• Check the generator and prongs for proper alignment
• Do not overtighten the straps
Infant Flow LP xation devices
Properly placing the nCPAP fixation device on the patient is
essential for delivering effective therapy. Applying excessive
or uneven pressure can result in necrosis to the infant’s skin
and potentially inhibit recovery. The Infant Flow LP nCPAP
system offers two fixation options. The familiar soft
cotton bonnets and patented comfort-wrap headgear
secures the generator quickly and easily while minimizing
pressure points.
To Next Page
Loading...
