45
Self assessment and
return demonstration
Using the training doll provided, follow the steps outlined
and document the measurements.
1. Measure the doll’s head and select the appropriate
headgear size.
2. Measure the doll’s head and select the appropriate
bonnet size.
3. Use the sizing guide to select the correct interface size.
Nasal prongs:
Nasal mask:
Observation skills assessment
This Infant Flow LP system has not been applied correctly.
Identify at least four application errors:
4. Apply the xation device (bonnet or headgear).
5. Attach the generator assembly with the interface to
the xation device.
6. Inspect for proper application on the doll and obtain
feedback from the instructor or another participant.
To Next Page
Loading...
