Fig.6.g
6.5.5 Set point setting
Set the set point, proportional band and maximum production
Fig.6.h
6.5.6 System information
Menu providing humidifier status, software and hardware information.
Fig.6.i
Unit status may be as described below:
Unit status Description
Standby unit in standby and ready to operate
Production the unit is producing steam
Alarm at least one alarm is active. Display the alarm by pressing the button
Off from BMS steam production disabled by the supervisor
Off by scheduler steam production disabled due to set time band
Off by Din production of steam stopped due to opening of the “remote ON/OFF” contact;
Off by keyboard the unit has been switched off from the keypad
54|6. Start-up and user interface
gaSteam - UG +0300090EN rel. 1.2– 09.10.2018
To Next Page
Loading...
