4.32
Disassembly and cleaning procedures
4.9.3 Milker cleaning
ATTENTION
To prevent the risk of contamination of the dispensed drinks, carry
out the cleaning procedure on a regular basis, following the in-
structions described in this manual.
NOTE
Remove the Milker.
See the relevant paragraph.
NOTE
For cleaning operations, use the CARIMALI cleaning agent
(06.00136).
Required tools:
• CARIMALI brush
(95.01806)
• Hot water
• Cleaning agent
Brush the Milker dis-
pensing nozzle with
the brush to remove
the residues.
Immerse all compo-
nents in a solution of
hot water and clean-
ing agent CARIMALI.
To Next Page
Loading...
