3.4
Installation
3.1.3 Connecting the machine to the water mains
WARNING
The connection to water mains must be performed by a skilled
technician in compliance with applicable regulations.
NOTE
8VHWKHFHUWL¿HG&$5,0$/,KRVH,QFDVHRIQHHGWKH
&XVWRPHULVKHOGWRLQVWDOOWKHVRIWHQHU¿OWHU
ATTENTION
To prevent damages to hydraulic system, the optimal range of the
water inlet from the mains is between 10 and 15 French Degrees
(60-80 mg/l Ca).
Description en
onnectin
the machine
to the power mains
Outer softener
¿OWHUWREHLQVWDOOHG
by the Customer.
Water supply hose
Any liquid discharge