3.6
Installation
Version of machine with water mains connection
Connect the ma-
chine to the water
mains.
After having con-
nected the machine
to the water mains,
make sure the
mains tap is open.
Connect the power
cable and position
the switching on
button on the posi-
tion “I” to switch the
machine on.
:DLW XQWLO WKH ¿UP-
ware is loaded and
follow the procedure
on the display.
NOTE
The procedure on the display is the same for both machine ver-
sions.
WARNING
$IWHUWKH ¿OOLQJ SURFHVV RI WKHK\GUDXOLFFLUFXLWKDVEHHQVWDUWHG
cannot be stopped and must be completed for the proper operation
of the machine.
NOTE
During the process, the display signals errors or messages.
To complete the passage, set the software as follows:
11:25 19 February 2017
92°/145°
|
System Manager
Boiler Fill
Switching on
button
To Next Page
Loading...
