Carrier VECTOR 1550 Series - Page 110

62-61753-21
5-16
CONFIGURATION
SELECTIONS
DESCRIPTION
 ECONO DELTA-T
OFF
2°C to 15°C
(3.6°F to 27.0°F)
in 0.5°C or °F
increments
Select the desired Delta-T value for activation of
ProductShield Econo: Go To S/S
This parameter is not available for Econo: Go To
Continuous Run
 PRODUCTSHIELD HIGH AIR
OFF
ON
OFF = The unit will operate normally in high and low
speeds.
ON = The unit will operate in high speed when the
ambient air temperature falls OUTSIDE the minimum
/ maximum temperature range (selected settings for
HIGH AIR MIN TEMP, HIGH AIR MAX TEMP, AND
HIGH AIR DELTA-T - see below)
 HIGH AIR MINIMUM TEMPERA-
TURE
-28.3°C to 48.3°C
(-19°F to 119°F)
in 0.5°F or °C
increments
Default:
48.3°C (119°F)
OFF
Select the lower limit of the ambient range desired for
this parameter. Refer to Section 4.6.3 for more infor-
mation on High Air Min. Temp.
 HIGH AIR MAXIMUM
TEMPERATURE
-28.3°C to 48.3°C
(-19°F to 119°F)
in 0.5°F or °C
increments
Default:
48.3°C (119°F)
OFF
Select the upper limit of the ambient range desired for
this parameter. Refer to Section 4.6.3 for more infor-
mation on Econo Max. Temp.
 HIGH AIR DELTA-T
OFF
2°C to 15°C
(3.6°F to 27.0°F)
in 0.5°C or °F in-
crements
Select the desired Delta-T value for activation of
ProductShield High Air
 PRODUCTSHIELD WINTER
OFF
-28.9°C to 0°C
(-20°F to 32.0°F) in
0.5°C or °F incre-
ments
Select the desired ambient temperature for activation
of installed ProductShield Winter. When ambient
temperature falls below this selected value, the unit
will run in Continuous Run only. Refer to Section
4.6.3 for more information on ProductShield Winter.
INTELLISET HOT KEY ENABLE
OFF
ON
YES = Indicates to the controller that the IntelliSet
menu is to be entered when the = key is pressed.
NO = Indicated to the controller that this feature is
disabled