Carrier VECTOR 1550 Series - Unit Data

62-61753-21
3-17
3.13 UNIT DATA
COOL DEFROST ALARM START-STOP
SETPOINT BOX TEMPERATURE
ALARM LIST
SELECT
MANUAL
DEFROST
SUOUNITNOCTAEH
PR ESS ↑ ↑ TO VIEW DATA
1. Press the SELECT key until the MessageCenter
displays “PRESS ↑↓ TO VIEW DATA.”
2. Press the UP ARROW key to move down the Data List beginning at the top,
or press the DOWN ARROW key to move up the Data List beginning at the
bottom. (Refer to Table 3--1)
5. Pressing UP or DOWN key will unlock that item and move to the next data item.
Pressing the “=” key will unlock the item, and after 10 seconds the default message
will be displayed.
START-STOP/
CONTINU OUS
3. The selected Data Item will remain in the MessageCenter for 10 seconds, then the de-
fault message (STATUS OK or other customer specified message) will display.
4. To lock an item in the MessageCenter for continuous viewing, press the “=“ key.
The Data item will flash continuously to indicate it is locked.
+34.5° F
--20.0