Carrier VECTOR 1550 Series - Trip Start

62-61753-21
3-14
3.10 TRIP START
COOL DEFROST ALARM START-STOP
ERUTAREPMETXOBTNIOPTES
ALARM LIST
SELECT
MANUAL
DEFROST
SUOUNITNOCTAEH
TRIP START ENTERED
START--STOP/
CONTINU OUS
2. Press the “=” key.
3. If trip start is acknowledged by the Data Recorder, “TRIP START ENTERED” will be displayed
for 5 seconds and then the display will revert back to the normal display. Otherwise CANNOT
ENTER TRIP START will flash and then the display will revert back to the normal display.
1. To mark the start of a trip in the Data Recorder, press the SELECT key until the Mes-
sageCenter displays “PRESS = TO MARK TRIP START”.
+34.5° F
--20.0
Trip Start places the present time and date as a stamp in the data recorder memory to allow easy review of the
data from the last trip, and to allow downloading data from a specific trip. A trip begins at a Trip Start and ends at
the next Trip Start.