62-61753-21 1-2
SECTION 1 -
SAFETY PRECAUTIONS
1.1 GENERAL PRODUCT SAFETY INSTRUCTIONS ON ALL CARRIER TRANSICOLD PRODUCT
1.1.1 Important to read and follow during Regular maintenance:
Regular maintenance includes a quick overview of the units from a safety perspective:
Service Technician must pay particular attention, but not exclusively to the 3 direc-
tives here under.
- The aim is to eliminate any risks for the user, the maintenance technician, the public and
the environment.
For 3 the followings directives:
ď€ If a defect which could potentially create a safety related incident is found and is not part of
standard maintenance operation:
A quotation must be sent to the customer including this 2 remarks before intervention:
This is potentially a product safety issue.
An agreement to repair shall be found.
1. Check the Tightening of bolts, screws and that the unit is correctly fastened:
If any screws or bolts are missing:
Replace and tighten by using the good torque.
If a torque is not conform to the technical recommendation:
Apply the good torque.
2. Check doors, skins grills, panels, etc….
If missing or cracked:
Repair or change it
3. Check electrical wires, harnesses and fuel lines:
If not correctly attached:
Secure the attachment by using tie raps.
If damaged but not visibility of copper:
Repair with textile tape CTD02-00137-00 (2 or 3 layers)
If damaged and copper is visible
Repair with liquid plastic coating and cover the cable with textile tape CTD02-00137-00 (2 or 3
layers)
If multiple wires are damaged
Replace the entire cable.
For more information about safety rules of electrical wires, harnesses and fuel lines:
Refer to the service bulletin SB21-15 accessible from CTE partner website.
For 3 the previous directives:
ď€ If a defect which could potentially create a safety related incident is found and is not part of
standard maintenance operation:
A quotation must be sent to the customer including this 2 remarks before intervention:
This is potentially a product safety issue.
An agreement to repair shall be found.