Case IH AFS Pro 700 - Position Recall operation details

3-SETUP
Press“Enable”toenablepositionrecall.
RAIL14DSP1592BA20
Whenpositionrecallisenabled,thesystemautomatically
savesthecurrentGPSlocationofthevehicle–specif-
ically,thereceiver–beforetheignitionswitchisturned
OFF.WhentheignitionswitchisturnedONagain,the
savedGPSlocationisusedtorestarttheconverging
process.UsingthelastknownGPScoordinatesreduces
thesignalconvergencetime.
Totakeadvantageofthisfeature:
•
YoumustturnthesystemOFFwhilethesignalisal-
readyconverged—thatis,receivingproperGPSinput
torecord.Ifthevehicleisleftintheeldoranopen
outdoorareaattheendoftheworksession,thecurrent
coordinatesaresaved.Ifthevehicleismovedinsidea
building,thesignalisblockedandnocoordinatesare
saved.Ifthevehicleisalwayspowereddowninsidea
building,positionrecallshouldnotbeenabledsinceit
willnotreduceconvergencetime.
•
Youmustnotmovethevehicle—notevenashortdis-
tance—betweenthetimeyouturntheignitionswitch
OFFandthetimethatinitializationiscomplete.
NOTE:Initializationisnotthesameasconvergence.
RAIL14DSP1593BA21
Withpositionrecallenabled,doNOTmovethevehicle
untilyouchecksystemstatuswhenthevehicleisturned
ON.
Afterthedisplaystartsup,aninformationmessagedis-
plays:“Inprogress,pleasewait.Donotmove[the]vehicle
untilcompleteorconvergencetimewillbeincreased.Has
thevehiclebeenmovedsince[thesystemwas]turned
off?
Youmustanswerthisquestioncorrectly.Failuretodoso
maypreventthesystemfromconvergingatall.
RAIL14DSP1584BA22
3-75