101
SHOOTING A MOVIE
SHOOTING A MOVIE
Before shooting a movie, you should specify a movie image
quality setting. Movie image quality is a standard that
determines the detail, smoothness, and clarity of a movie during
playback. Shooting with the high-quality (HQ) setting will result
in better image quality, but it also shortens the amount of time
you can shoot.
• Each movie can be up to 10 minutes long. Movie recording
stops automatically after 10 minutes of recording.
1. In a REC mode, press [MENU].
2. On the “Quality” tab, select “ Quality” and
then press [X].
3. Use [S] and [T] to select the quality setting
you want and then press [SET].
• The “ ” indicator is on the monitor screen while “UHQ
Wide” or “HQ Wide” is selected for the quality setting.
Movie Image Quality
Image Quality
(pixels)
Approximate
Data Rate
Frame Rate
UHQ 640 × 480
5.8 Megabits/
second
20 frames/
second
UHQ Wide 848 × 480
7.0 Megabits/
second
20 frames/
second
HQ 640 × 480
2.8 Megabits/
second
20 frames/
second
HQ Wide 848 × 480
3.4 Megabits/
second
20 frames/
second
Normal 640 × 480
1.4 Megabits/
second
20 frames/
second
LP 320 × 240
845 Kilobits/
second
20 frames/
second
Image Quality
(pixels)
Approximate
Data Rate
Frame Rate
To Next Page
Loading...
Need help?
General
Weight and Dimensions
