83
SHOOTING A SNAPSHOT
Selecting the Continuous Shutter Mode
1.
In a REC mode, press [MENU].
2. On the “REC” tab, select “Continuous” and
then press [X].
3. Use [S] and [T] to select the mode you want
and then press [SET].
This enables the continuous shutter mode you selected and
displays its icon on the monitor screen.
To turn off continuous shutter, select “Off”.
Recording with Normal-speed
Continuous Shutter, High-speed
Continuous Shutter, and Flash
Continuous Shutter
1.
Press the shutter button to shoot.
• With Normal-speed continuous shutter and High-speed
continuous shutter, images continue to be shot as long as
you keep the shutter button depressed. Releasing the
shutter button stops shooting.
• Flash continuous shutter can shoot up to three images.
Shooting stops if you release the shutter button before
three images are recorded.
IMPORTANT!
• The speed of normal speed continuous shutter and high-
speed continuous shutter depend on the type of memory
card being used and the amount free space available in
memory. When shooting to built-in memory, continuous
shutter shooting is relatively slow.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
