196
USING AUDIO
Voice Recording lets you record audio only, without a snapshot
or movie.
Using built-in memory only, you get up to about 35 minutes of
Voice Recording.
1. In a REC mode, press [MENU].
2. On the “REC” tab, select “REC Mode” and
then press [X].
3. Use [S] and [T] to
select “ Voice” and
then press [SET].
This causes “ ” to appear
on the monitor screen.
4. Press the shutter button to start recording.
• The operation lamp flashes green while recording is in
progress.
• Pressing [SET] during recording will insert a marker into
the recording. During later playback, you will be able to
jump to the markers in the recording.
5. Press the shutter button again to stop audio
recording and return to the screen in step 3.
• Recording also will stop automatically if memory
becomes full.
6. Now you can repeat steps 4 and 5 to record
more.
• To exit voice recording, press [MENU], change the REC
Mode setting to something other than “ Voice”, and
then press [SET].
Recording Audio Only (Voice
Recording)
Recording Time
Remaining Recording Time
To Next Page
Loading...
Need help?
General
Weight and Dimensions
